Products

2″ (2-Inch) Solar Borehole Pumps

Aquasolar builds 1 series of 2-inch solar submersible pumps — 8 models in total, reaching up to 140 m of head and 1.7 m³/h of flow. A 2″ pump fits a borehole whose inner diameter is at least slightly larger than the pump body, so check the minimum borehole figure in each series before ordering. Screw (helical-rotor) models handle sandy water; stainless-impeller models favour higher flows.

All 8 matching models

#ModelSeriesPower (W)Voltage (V)Max head (m)Max flow (m³/h)OutletRecommended PV
12PWSS1.2-45-24-1802″ DC Screw Solar Pump18024451.20.75"1 × 250 Wp
22PSC1.5-35-24-2502″ DC Screw Solar Pump25024351.50.75"1 × 330 Wp
32PWSS1.2-60-24-2502″ DC Screw Solar Pump25024601.20.75"1 × 330 Wp
42PSC1.5-60-48-4002″ DC Screw Solar Pump40048601.50.75"2 × 300 Wp
52PWSS1.5-90-48-4002″ DC Screw Solar Pump40048901.50.75"2 × 300 Wp
62PSC1.5-85-72-6002″ DC Screw Solar Pump60072851.50.75"3 × 300 Wp
72PWSS1.5-120-72-6002″ DC Screw Solar Pump600721201.50.75"3 × 300 Wp
82PWSS1.7-140-96-7502″ DC Screw Solar Pump750961401.70.75"3 × 300 Wp

Solar Water Pumps

Frequently Asked Questions

What borehole diameter does a 2″ solar pump need?

The pump body is nominally 2 inches; the borehole's inner diameter must be slightly larger. Each Aquasolar series lists its exact outer diameter and minimum borehole size in the specifications and datasheet.

Screw pump or impeller pump — which one?

Screw (helical-rotor) pumps deliver high head at modest flows and tolerate sand — ideal for deep, narrow or silty wells. Impeller (centrifugal) pumps deliver higher flows and suit clean water. Both are listed below.

Can it run on solar only?

Yes — DC models run purely on solar with water stored in a tank. If you need water around the clock, the AC/DC hybrid versions switch to grid or generator power automatically when sunlight is insufficient.

Need the right pump for your project?

Tell us your head, flow and water source — our engineers reply within 24 hours.

Find my pumpGet a Quote