DCBomba submersa3″

3″ DC Plastic Impeller Solar Pump

Name: 3″ DC Plastic Impeller Solar Pump
Brand: Aquasolar

230 mAltura máx.

6.5 m³/hVazão máx.

300–2200 WFaixa de potência

2 yrGarantia

✓ 2-yr Garantia✓ 70+ países✓ 15+ anos de experiência✓ CE · RoHS · ISO

Engineering note. Maximum head and maximum flow are curve endpoints, not one simultaneous duty point. Final selection is verified against your total head, required flow and solar resource.

↓ Ficha técnica (PDF)Solicitar orçamento

Permanent-magnet brushless motor + intelligent MPPT (auto start/stop, soft-start)
Controller LED display: voltage / current / power / speed (RPM) / error code
Oil cooling
Full protection: over/under-voltage, overload, over-current, dry-run, reverse, over-temp
Runs directly off PV modules — no batteries required
Engineering-plastic impeller + SUS304 shaft & sleeve — economy clean-water build

Especificações

#	Model	Tensão (V)	Potência (W)	Corrente (A)	Vazão máx. (m³/h)	Altura máx. (m)	Saída	Ø (mm)	Comprimento (mm)	Peso (kg)	Cabo recomendado (mm²)	FV recomendado
1	3PSC3.0-30-24-300	24	300	12.5	3	30	1"	74	745	6.3	4	1 × 400 Wp
2	3PSC3.0-45-48-400	48	400	8.3	3	45	1"	74	780	6.7	2.5	2 × 300 Wp
3	3PSC6.0-40-72-600	72	600	8.3	6	40	1"	74	840	7.5	2.5	3 × 300 Wp
4	3PSC3.5-70-72-600	72	600	8.3	3.5	70	1"	74	840	7.5	2.5	3 × 300 Wp
5	3PSC6.5-55-96-750	96	750	7.8	6.5	55	1"	74	890	8.2	2.5	3 × 300 Wp
6	3PSC3.5-90-96-750	96	750	7.8	3.5	90	1"	74	890	8.2	2.5	3 × 300 Wp
7	3PSC6.5-80-144-1100	144	1100	7.6	6.5	80	1"	74	1000	9.6	2.5	6 × 300 Wp
8	3PSC3.5-120-144-1100	144	1100	7.6	3.5	120	1"	74	1000	9.6	2.5	6 × 300 Wp
9	3PSC6.5-120-192-1500	192	1500	7.8	6.5	120	1"	74	1130	11.3	2.5	8 × 300 Wp
10	3PSC3.5-150-192-1500	192	1500	7.8	3.5	150	1"	74	1130	11.3	2.5	8 × 300 Wp
11	3PSC6.5-160-280-2200	280	2200	7.9	6.5	160	1"	74	1355	14.2	2.5	10 × 300 Wp
12	3PSC3.5-230-280-2200	280	2200	7.9	3.5	230	1"	74	1355	14.2	2.5	10 × 300 Wp

Motor & Acionamento

Motor	Permanent-magnet DC brushless (PMSM)
Acionamento	Sensorless FOC, pure sine-wave output
Rastreamento MPPT	>99%
Classe de isolamento	F (155 °C)
Regime	S1 (continuous)
Proteção IP	IP68 (submersible motor) / IP66
Imersão máx.	150 m
Garantia	2

Controlador & Proteções

Controlador	Sensorless FOC sine-wave vector drive + MPPT (>99%), LED display
Visor	Voltage, Current, Power, Speed (RPM), Speed adjustment, Error code
Tamanho do controlador	360 × 260 × 140 mm

Proteções

OverloadOver-currentUnder-loadUnder-voltageReverse-connectionOver-temperature (thermal)Dry-run / low-waterSoft-start

Monitoramento remoto (opcional): Optional 4G/GSM or Wi-Fi monitoring module — remote flow, water level, energy and fault alerts with OTA updates (add-on; the standard controller uses a local LED display).

Condições de operação

Temperatura da água	0–40 °C
Teor de areia	≤ 0.05 % (≤ 500 g/m³)
Faixa de pH	5–9
Temperatura ambiente	-15 to 70 °C
Poço mín.	76 mm

Materiais

Standard (economy) — SUS304 sleeve + engineering-plastic impeller & diffuser + SUS304 shaft (Best price for clean-water irrigation / domestic supply)
Corrosion (option) — SUS316 sleeve + plastic impeller (plastic is inherently corrosion-proof)
Sandy (option) — SUS304 impeller upgrade (plastic wears faster in sand)

Componentes premium

100% copper motor windings
Class F (155 °C) insulation system
NSK-grade sealed ball bearings
SUS304 shaft + engineering-plastic impellers
Silicon-carbide (SiC) mechanical seal
Oil-cooled motor
PMSM + sensorless FOC sine-wave controller, MPPT >99%

Cabo recomendado

PV-to-controller & motor cable 2.5–4 mm² by model (copper, sized for a ~50 m run; step up one size per additional ~50 m of drop).

Per-model cable cross-section is listed in the specification table above (mm² column).

Certificações

RoHSCBTUVSGSISO 9001ISO 14001

Normas

IEC 62253 (PV pumping systems)IEC 60034 (rotating machines)IEC 60529 (enclosure / IP)

Bomba submersa

DCBomba submersa