3″ DC Plastic Impeller Solar Pump
DCمضخة غاطسة3″

3″ DC Plastic Impeller Solar Pump

230 mأقصى ارتفاع
6.5 m³/hأقصى تدفق
300–2200 Wنطاق القدرة
2 yrالضمان
2-yr الضمان70+ دولةخبرة 15+ عامًا✓ CE · RoHS · ISO

Engineering note. Maximum head and maximum flow are curve endpoints, not one simultaneous duty point. Final selection is verified against your total head, required flow and solar resource.

  • Permanent-magnet brushless motor + intelligent MPPT (auto start/stop, soft-start)
  • Controller LED display: voltage / current / power / speed (RPM) / error code
  • Oil cooling
  • Full protection: over/under-voltage, overload, over-current, dry-run, reverse, over-temp
  • Runs directly off PV modules — no batteries required
  • Engineering-plastic impeller + SUS304 shaft & sleeve — economy clean-water build

المواصفات

#Modelالجهد (V)القدرة (W)التيار (A)أقصى تدفق (m³/h)أقصى ارتفاع (m)المخرجØ (mm)الطول (mm)الوزن (kg)الكابل الموصى به (mm²)الألواح الموصى بها
13PSC3.0-30-24-3002430012.53301"747456.341 × 400 Wp
23PSC3.0-45-48-400484008.33451"747806.72.52 × 300 Wp
33PSC6.0-40-72-600726008.36401"748407.52.53 × 300 Wp
43PSC3.5-70-72-600726008.33.5701"748407.52.53 × 300 Wp
53PSC6.5-55-96-750967507.86.5551"748908.22.53 × 300 Wp
63PSC3.5-90-96-750967507.83.5901"748908.22.53 × 300 Wp
73PSC6.5-80-144-110014411007.66.5801"7410009.62.56 × 300 Wp
83PSC3.5-120-144-110014411007.63.51201"7410009.62.56 × 300 Wp
93PSC6.5-120-192-150019215007.86.51201"74113011.32.58 × 300 Wp
103PSC3.5-150-192-150019215007.83.51501"74113011.32.58 × 300 Wp
113PSC6.5-160-280-220028022007.96.51601"74135514.22.510 × 300 Wp
123PSC3.5-230-280-220028022007.93.52301"74135514.22.510 × 300 Wp

المحرك & نظام الإدارة

المحركPermanent-magnet DC brushless (PMSM)
نظام الإدارةSensorless FOC, pure sine-wave output
تتبع MPPT>99%
فئة العزلF (155 °C)
نظام التشغيلS1 (continuous)
درجة الحماية IPIP68 (submersible motor) / IP66
أقصى غمر150 m
الضمان2

وحدة التحكم & الحمايات

وحدة التحكمSensorless FOC sine-wave vector drive + MPPT (>99%), LED display
الشاشةVoltage, Current, Power, Speed (RPM), Speed adjustment, Error code
حجم وحدة التحكم360 × 260 × 140 mm
الحمايات
OverloadOver-currentUnder-loadUnder-voltageReverse-connectionOver-temperature (thermal)Dry-run / low-waterSoft-start
المراقبة عن بُعد (اختياري): Optional 4G/GSM or Wi-Fi monitoring module — remote flow, water level, energy and fault alerts with OTA updates (add-on; the standard controller uses a local LED display).

ظروف التشغيل

درجة حرارة الماء0–40 °C
نسبة الرمل≤ 0.05 % (≤ 500 g/m³)
نطاق الأس الهيدروجيني5–9
درجة الحرارة المحيطة-15 to 70 °C
أقل قطر بئر76 mm

المواد

  • Standard (economy)SUS304 sleeve + engineering-plastic impeller & diffuser + SUS304 shaft (Best price for clean-water irrigation / domestic supply)
  • Corrosion (option)SUS316 sleeve + plastic impeller (plastic is inherently corrosion-proof)
  • Sandy (option)SUS304 impeller upgrade (plastic wears faster in sand)

مكونات متميزة

  • 100% copper motor windings
  • Class F (155 °C) insulation system
  • NSK-grade sealed ball bearings
  • SUS304 shaft + engineering-plastic impellers
  • Silicon-carbide (SiC) mechanical seal
  • Oil-cooled motor
  • PMSM + sensorless FOC sine-wave controller, MPPT >99%

الكابل الموصى به

PV-to-controller & motor cable 2.5–4 mm² by model (copper, sized for a ~50 m run; step up one size per additional ~50 m of drop).

Per-model cable cross-section is listed in the specification table above (mm² column).

الشهادات

RoHSCBTUVSGSISO 9001ISO 14001
المعايير
IEC 62253 (PV pumping systems)IEC 60034 (rotating machines)IEC 60529 (enclosure / IP)

مضخة غاطسة