6″ (6-Inch) Solar Borehole Pumps
Aquasolar builds 2 series of 6-inch solar submersible pumps — 55 models in total, reaching up to 260 m of head and 40 m³/h of flow. A 6″ pump fits a borehole whose inner diameter is at least slightly larger than the pump body, so check the minimum borehole figure in each series before ordering. Screw (helical-rotor) models handle sandy water; stainless-impeller models favour higher flows.
Top 36 of 55 matching models
Showing the 36 closest matches. All 55 matching models are covered by our free sizing calculator.
Bombas de água solares
Q-H4″–6″ DC Brushless Stainless Steel Impeller Solar Pump
Q-H4″–6″ AC/DC Stainless Steel Impeller Solar Pump
Perguntas frequentes
What borehole diameter does a 6″ solar pump need?
The pump body is nominally 6 inches; the borehole's inner diameter must be slightly larger. Each Aquasolar series lists its exact outer diameter and minimum borehole size in the specifications and datasheet.
Screw pump or impeller pump — which one?
Screw (helical-rotor) pumps deliver high head at modest flows and tolerate sand — ideal for deep, narrow or silty wells. Impeller (centrifugal) pumps deliver higher flows and suit clean water. Both are listed below.
Can it run on solar only?
Yes — DC models run purely on solar with water stored in a tank. If you need water around the clock, the AC/DC hybrid versions switch to grid or generator power automatically when sunlight is insufficient.
Precisa da bomba certa para o seu projeto?
Informe altura, vazão e fonte de água — nossos engenheiros respondem em 24 horas.