DCPompe immergée4″ · 6″

4″–6″ DC Brushless Stainless Steel Impeller Solar Pump

Name: 4″–6″ DC Brushless Stainless Steel Impeller Solar Pump
Brand: Aquasolar

260 mHauteur max.

40 m³/hDébit max.

300–3000 WPlage de puissance

3 yrGarantie

✓ 3-yr Garantie✓ 70+ pays✓ 15+ ans d'expérience✓ CE · RoHS · ISO

Engineering note. Maximum head and maximum flow are curve endpoints, not one simultaneous duty point. Final selection is verified against your total head, required flow and solar resource.

↓ Fiche technique (PDF)Demander un devis

Permanent-magnet brushless motor + intelligent MPPT (auto start/stop, soft-start)
Controller LED display: voltage / current / power / speed (RPM) / error code
Oil cooling
Full protection: over/under-voltage, overload, over-current, dry-run, reverse, over-temp
Runs directly off PV modules — no batteries required
All-stainless SUS304 wetted parts (SUS316 optional for corrosive / coastal water)

Spécifications

#	Model	Tension (V)	Puissance (W)	Courant (A)	Débit max. (m³/h)	Hauteur max. (m)	Refoulement	Ø (mm)	Longueur (mm)	Poids (kg)	Câble recommandé (mm²)	PV recommandé
1	4PPSS3.0-30-24-300	24	300	12.5	3	30	2"	98	770	8.9	4	1 × 400 Wp
2	4PPSS3.0-50-48-400	48	400	8.3	3	50	2"	98	790	9.5	2.5	2 × 300 Wp
3	4PPSS7.0-40-72-600	72	600	8.3	7	40	2"	98	840	10.8	2.5	3 × 300 Wp
4	4PPSS5.5-50-72-600	72	600	8.3	5.5	50	2"	98	840	10.8	2.5	3 × 300 Wp
5	4PPSS3.0-80-72-600	72	600	8.3	3	80	2"	98	840	10.8	2.5	3 × 300 Wp
6	4PPSS15.0-30-96-750	96	750	7.8	15	30	2"	98	870	11.7	2.5	3 × 300 Wp
7	4PPSS8.0-50-96-750	96	750	7.8	8	50	2"	98	870	11.7	2.5	3 × 300 Wp
8	4PPSS5.5-70-96-750	96	750	7.8	5.5	70	2"	98	870	11.7	2.5	3 × 300 Wp
9	4PPSS3.0-100-96-750	96	750	7.8	3	100	2"	98	870	11.7	2.5	3 × 300 Wp
10	4PPSS15.0-45-144-1100	144	1100	7.6	15	45	2"	98	955	13.9	2.5	6 × 300 Wp
11	4PPSS8.0-80-144-1100	144	1100	7.6	8	80	2"	98	955	13.9	2.5	6 × 300 Wp
12	4PPSS5.5-100-144-1100	144	1100	7.6	5.5	100	2"	98	955	13.9	2.5	6 × 300 Wp
13	4PPSS3.0-140-144-1100	144	1100	7.6	3	140	2"	98	955	13.9	2.5	6 × 300 Wp
14	6PPSS25.0-30-192-1500	192	1500	7.8	25	30	3"	144	1170	29	2.5	8 × 300 Wp
15	4PPSS21.0-35-192-1500	192	1500	7.8	21	35	2"	98	1045	16.4	2.5	8 × 300 Wp
16	4PPSS16.0-70-192-1500	192	1500	7.8	16	70	2"	98	1045	16.4	2.5	8 × 300 Wp
17	4PPSS9.0-100-192-1500	192	1500	7.8	9	100	2"	98	1045	16.4	2.5	8 × 300 Wp
18	4PPSS6.0-130-192-1500	192	1500	7.8	6	130	2"	98	1045	16.4	2.5	8 × 300 Wp
19	4PPSS3.0-170-192-1500	192	1500	7.8	3	170	2"	98	1045	16.4	2.5	8 × 300 Wp
20	6PPSS25.0-45-280-2200	280	2200	7.9	25	45	3"	144	1295	35.1	2.5	10 × 300 Wp
21	4PPSS23.0-55-280-2200	280	2200	7.9	23	55	2"	98	1205	20.9	2.5	10 × 300 Wp
22	4PPSS17.0-100-280-2200	280	2200	7.9	17	100	2"	98	1205	20.9	2.5	10 × 300 Wp
23	4PPSS9.0-140-280-2200	280	2200	7.9	9	140	2"	98	1205	20.9	2.5	10 × 300 Wp
24	4PPSS6.0-190-280-2200	280	2200	7.9	6	190	2"	98	1205	20.9	2.5	10 × 300 Wp
25	4PPSS3.5-260-280-2200	280	2200	7.9	3.5	260	2"	98	1205	20.9	2.5	10 × 300 Wp
26	6PPSS40.0-30-385-3000	385	3000	7.8	40	30	3"	144	1440	42.1	2.5	13 × 300 Wp
27	4PPSS28.0-55-385-3000	385	3000	7.8	28	55	2"	98	1390	25.9	2.5	13 × 300 Wp
28	6PPSS30.0-55-385-3000	385	3000	7.8	30	55	3"	144	1440	42.1	2.5	13 × 300 Wp
29	4PPSS23.0-65-385-3000	385	3000	7.8	23	65	2"	98	1390	25.9	2.5	13 × 300 Wp
30	4PPSS17.0-130-385-3000	385	3000	7.8	17	130	2"	98	1390	25.9	2.5	13 × 300 Wp
31	4PPSS9.5-180-385-3000	385	3000	7.8	9.5	180	2"	98	1390	25.9	2.5	13 × 300 Wp
32	4PPSS6.5-260-385-3000	385	3000	7.8	6.5	260	2"	98	1390	25.9	2.5	13 × 300 Wp

Moteur & Entraînement

Moteur	Permanent-magnet DC brushless (PMSM)
Entraînement	Sensorless FOC, pure sine-wave output
Suivi MPPT	>99%
Classe d'isolation	F (155 °C)
Service	S1 (continuous)
Indice IP	IP68 (submersible motor) / IP66
Immersion max.	150 m
Garantie	3

Contrôleur & Protections

Contrôleur	Sensorless FOC sine-wave vector drive + MPPT (>99%), LED display
Affichage	Voltage, Current, Power, Speed (RPM), Speed adjustment, Error code
Taille du contrôleur	360 × 260 × 140 mm

Protections

OverloadOver-currentUnder-loadUnder-voltageReverse-connectionOver-temperature (thermal)Dry-run / low-waterSoft-start

Surveillance à distance (option): Optional 4G/GSM or Wi-Fi monitoring module — remote flow, water level, energy and fault alerts with OTA updates (add-on; the standard controller uses a local LED display).

Conditions de fonctionnement

Température de l'eau	0–40 °C
Teneur en sable	≤ 0.05 % (≤ 500 g/m³)
Plage de pH	5–9
Température ambiante	-15 to 70 °C
Forage min.	100–150 mm

Matériaux

Standard — SUS304 impeller, diffuser, sleeve & shaft (All-stainless wetted parts — flagship durable line)
Corrosion (option) — SUS316 wetted parts

Composants premium

100% copper motor windings
Class F (155 °C) insulation system
NSK-grade sealed ball bearings
SUS304 shaft & impellers (SUS316 optional)
Silicon-carbide (SiC) mechanical seal
Oil-cooled motor
PMSM + sensorless FOC sine-wave controller, MPPT >99%

Câble recommandé

PV-to-controller & motor cable 2.5–4 mm² by model (copper, sized for a ~50 m run; step up one size per additional ~50 m of drop).

Per-model cable cross-section is listed in the specification table above (mm² column).

Certifications

RoHSCBTUVSGSISO 9001ISO 14001

Normes

IEC 62253 (PV pumping systems)IEC 60034 (rotating machines)IEC 60529 (enclosure / IP)

Pompe immergée

DCPompe immergée